Traditional Wine Racks
Natural Pine Mahogany Stain Oak Stain
All Traditional Racks, whether for Standard sized bottles, Halves or Magnums can be made to your required size. Racks can be made to fit within your available space so please phone, fax or email your requirements including measurements and plans if available, and we’ll be happy to advise you how many bottles your space allows and the price payable.
Double Depth Wine Rack |
These types of wine racks can be constructed to suit a customers own particular wine storage requirements, in order to fit any space, in any shape or form.
The Wineware standard winerack will accommodate all bottles of the normal 75 cl size, including quart and half-bottles of champagne, (Standard size racks will hold Bollinger/Pol Roger style bottles and the Champagne/Magnum racks will hold Krug and Dom Perignon style bottles). It is also possible to manufacture wineracks to hold just half-bottles or magnums, but please be aware that due to the different sized spaces, visually, the horizontal lines will not be consistent between the three sizes of racks. The single depth wine rack (220 mm) is the norm but double depth winerack’s (533 mm) built to hold two bottles in each opening can also be made to order, if required.
Double Depth Wine Rack |
The standard bottle and half bottle racks are constructed from galvanised steel (1.1
Cuprinol Wine Rack |
Wine Rack Connecting Kit |
mm thick) whereas the Magnum and Double Depth Wine Racks are constructed from 1.2mm thick galvanised steel. All are built of solid Natural Pine, although they are also available with an Oak Stain, a Mahogany Stain or a Cuprinol finish at a small additional charge (see below). The wine racks are intended to be stood on a level floor and wall fixing points, ( eyelets) are provided for this purpose. Securing the racks to the wall is strongly recommended by using these fixing points with properly drilled holes and rawl plugs. Wine racks that do not stand directly on the floor should have strong additional supports underneath, such as shelves or brackets.
Please Note: The racks finished in Cuprinol are especially useful in cellars that may be slightly damp or have a higher than normal humidity.
When ordering please check that the wine racks overall measurements, if constructed in one piece, can be handled easily through any doorway or around corners etc. to reach its final destination. If this is not the case, the wine racks can be manufactured in appropriate sizes and joined with connecting kits which are attached very easily by the customer after delivery, with no adverse effects on the final look or strength of the wine racks after installation.
If the wine rack needs to be split into two or more pieces for either ease of access or handling, then please note the rack is always split and connected vertically only, and never horizontally, because of the bottle weight factor.
Wine Rack Plinths
220mm(d) 120mm(h) (single depth) £47.00 for the first metre, £15.00 per metre thereafter.
300mm(d) 120mm(h) (single depth the entire bottle enclosed) £57.00 for the first metre, then £18.00 thereafter.
533 or 600mm(d) 120mm (h) - (double depth) £66.00 per metre for the first metre, £25.00 per metre thereafter.
650mm(d) 120mm(h) - (double depth champagne) £90.00
Minimum purchase one metre and then priced in half metre increments.
The plinths are made to 5mm wider than the wine racks they are supporting.
The wooden plinths have been designed to fit beneath your traditional wine racks giving the entire racks some added support and also gives the bottom rows of bottles protection from dirt and damage from accidental knocking.
Plinths are constructed from grade ’A’ furniture pine and stained to match your racks.
Wine Label Protector Clips
The clear plastic protector clips can be fitted onto the horizontal metal strips of the wine rack, between the pine slats, and will then protect the front and back labels of the wine bottles when inserting or withdrawing them from the rack. The clips are available at a cost of 21 pence per clip.
Lockable Wine Racking
We can supply lockable metal doors for Traditional Wine Racks, if you are interested, please contact us with the sizes you require for a quotation.
COST
The price of wine racks are per bottle hole:
- | - | Standard Natural Pine / Stain | Half Bottle Natural Pine / Stain |
Single Depth 220mm | 60 Holes or Less | £1.10 £1.14 | £1.10 £1.14 |
Single Depth 300mm | 60 Holes or Less | £1.24 £1.29 | £1.24 £1.29 |
Single Depth 220mm | 61 Holes or More | £1.00 £1.04 | £1.00 £1.04 |
Single Depth 300mm | 61 Holes or More | £1.13 £1.19 | £1.13 £1.19 |
Double Depth 533mm | - | £1.76 £1.83 | - |
Magnum/Champagne/Litre 275mm | - | £1.45 £1.53 | - |
Magnum Double Depth 630mm | - | £2.00 £2.09 | - |
Plinths | First Metre | Additional Metres | - |
Single Depth 220mm D x 120mm H | £47.00 | £15.00 | - |
Single Depth 300mm D x 120mm H Entire bottle fits into rack | £57.00 | £18.00 | - |
Double Depth 533 or 600mm D x 120mm H | £66.00 | £25.00 | - |
Champagne Double Depth 650mm x 120mm H | - | - | - |
Connecting Kit (Each kit accommodates 12 bottle holes high) | £4.50 | - | - |
| Wine Label Protector Clips | 21p each | | |
CARRIAGE
Delivery is £18.50 for mainland U.K. for all wine storage racks (please contact us at Tel: 01903 786148 or email info@wineware.co.uk for quotes for other delivery addresses).
On larger heavier wine racks we reserve the right to add a supplementary charge to cover additional delivery costs.
All our made to measure wine racks are constructed and delivered to any mainland UK address, barring any unforeseen circumstances, within 14 - 21 days from the date of your order. Payments are taken with order, receipts issued and posted, and we will telephone advise the exact delivery date.
Please Note: Our wood stains and dimensional charts have changed since November 2008. This means that any racks purchased from that date intending to be joined onto racks purchased before that date will not be compatible, in sizes and colour, so please phone us, if this is the situation and we will accommodate you.
HOW TO ORDER YOUR WINE RACK
Measure the height and width of the available space.
Using the DIMENSION CHART above (PDF Downloads at top of page) read off the number of bottles which appear against the measurement immediately below your available height
Repeat the above process for the width measurement.
Example: If your available space measures 72’’ by 57’’ then your winerack will accomodate 18 wine bottles by 14 wine bottles giving you space for 252 wine bottles.
If further assistance is required please telephone our helpline: 01903 786148
If you would like to view the Traditional Wine Rack dimension chart above (PDF Downloads at top of page)
