  
Dark Oak Stain Light Oak Stain Red Mahogany Stain
All Traditional Racks, whether for Standard sized bottles, Halves or Magnums can be made to your required size. Racks can be made to fit your available space so please phone, fax or email your requirements including measurements and plans if available, and we’ll be happy to advise you how many bottles you can fit and the price.  These types of wine racks can be constructed to suit a customers own particular wine storage requirements, in order to fit any space, in any shape or form.
The Wineware standard winerack will accommodate all bottles of the normal 75 cl size, including quart and half-bottles of champagne, and additionally, it is possible to manufacture a winerack to hold half-bottles or magnums only. The single depth wine rack (225 mm) is the norm but double depth winerack’s (533 mm) built to hold two bottles in each opening can also be made to order, if required. Double depth wine rack example  All wine racks are constructed from galvanised steel (1.2 mm thick) and solid natural pine, although if required, Dark Oak, Mahogany or Black stains are available at no extra charge (pictured below). The wine racks stand, without fixing, on a level floor, however, eyelets are provided in case fixing to a wall should be deemed necessary (and this is strongly recommended wherever possible). Wine racks that do not stand directly on the floor should have strong additional supports underneath, such as a shelf or brackets.
When ordering please check that the wine racks overall measurements, if constructed in one piece, can be handled easily through any doorway or around corners etc. to reach its final destination. If this is not the case, the wine racks can be manufactured in appropriate sizes and joined with connecting kits which are attached very easily by the customer after delivery, with no adverse effects on the final look or strength of the wine racks after installation. If the wine rack needs to be split into two or more pieces for either ease of access or handling, then please note the rack is always split and connected vertically only and never horizontally, because of the bottle weight factor.  | A wine rack connecting kit is sufficient to complete 12 bottle holes high and consists of 12 nails, 3 long steel strips and 13 steel connecting strips. Each kit costs £4.50 (including vat). 
|
 Wine Rack Plinths275mm(d) 80mm(h) (single depth) £35.00 per metre
300mm(d) 80mm(h) (single depth the entire bottle enclosed) £40.00
583 or 600mm(d) 80mm (h) - (double depth) £45.00 per metre
650mm(d) 80mm(h) - (double depth champagne) £80.00
Minimum purchase one metre and then priced in half metre increments. The plinths are made to 5mm wider than the wine racks they are supporting. The wooden plinths have been designed to fit beneath your traditional wine racks giving the entire racks some added support and also gives the bottom rows of bottles protection from dirt and damage from accidental knocking. Plinths are constructed from grade ’A’ furniture pine and stained to match your racks. Connecting Kits
To connect the racks you need to:- - Stand the racks to be connected side by side and face the back of these racks.
- Remove the 4 existing nails, 2 either side of the space to be connected, in 3 separate places strategically within the 12 spaces to be connected i.e. rows 1, 6, and 12
- Position the long steel strips to ’join’ the two racks and spaces and refix with the new nails provided.
- When steps 1 to 3 are complete, simply tap the small steel connecting strips into place at the front of the rack.
- Fix the rack to the wall with either: a) screws directly into the wall through the predrilled holes in the 45 degrees angled steel fixing plates at the back of the rack, or b) by screwing the rack to horizontal wooden battens positioned on the wall in line with the predrilled holes in the steel fixing plates.
N.B. If the batten system is used, then steps 1 to 4 above are not needed, as the racks simply need to be fixed to the battens with an appropriate gap to allow the connecting strips to be tapped home. COST
The price of wine racks are per bottle holes.
| Standard | Half Bottle | Magnum | Single Depth 225mm | £1.00 | £1.00 | £1.00 | Single Depth 300mm | £1.05 | £1.05 | £1.05 | Irregular shaped racks 225mm | £1.05 | £1.05 | £1.05 | Irregular shaped racks 300mm | £1.10 | £1.10 | £1.10 | Double Depth 533mm | £1.75 | £1.75 | £1.75 | | Double Depth 533mm Irregular shape | £1.90 | £1.90 | £1.90 | Champagne Double Depth 645mm | £1.90 | £1.90 | £1.90 | Plinths | | | | Single Depth 275mmD x 80mm H | £35.00 | | | Single Depth 300mmD x 80mmH
Entire bottle fits into rack | £40.00 | | | Double Depth 583 or 600mmD x 80mmH | £45.00 | | | Champagne Double Depth 650mm x 80H | £80.00 |
| | Connecting Kit (for 12 bottle holes high) | £4.50 | | |
CARRIAGE Delivery is £18.50 for mainland U.K. for all wine storage racks (please contact us at Tel: 01903 786148 or email info@wineware.co.uk for quotes for other delivery addresses). On larger heavier wine racks we reserve the right to add a supplementary charge to cover additional delivery costs All our made to measure wine racks are constructed and delivered to any mainland UK address, barring any unforeseen circumstances, within 14 - 21 days from the date of your order. Payments are taken with order, receipts issued and posted, and we will telephone advise the exact delivery date. HOW TO ORDER YOUR WINE RACK - Measure the height and width of the available space.
- Using the DIMENSION CHART above (PDF Downloads at top of page) read off the number of bottles which appear against the measurement immediately below your available height
- Repeat the above process for the width measurement.
Example: If your available space measures 72’’ by 57’’ then your winerack will accomodate 18 wine bottles by 14 wine bottles giving you space for 252 wine bottles. If further assistance is required please telephone our helpline:
01903 786148 If you would like to view the Traditional Wine Rack dimension chart above (PDF Downloads at top of page)
|
