VacuVin Winemaster Corkscrew - Transparent

• Uncorks without twisting
• Foilcutter attached to the top
• Easy and light operation
• Replaceable, coated spiral

An easy to use corkscrew which works with the minimum of effort and is supplied complete with a clip-on foil cutter. After removing the foil, simply lock the corkscrew onto the bottle, by pulling the sleeve down firmly, operate the levers and the cork is removed. Move the levers again and the cork is automatically ejected from the corkscrew. No twisting or turning and guaranteed for 2 years.

Instructions
Cutting the foil
- Place the foilcutter onto the bottle.
- Squeeze and turn the foilcutter simultaneously to cut the foil.
- Carefully replace the foilcutter on top of the corkscrew by squeezing it slightly.

Uncorking the bottle
- Make sure all the handles are in an upward position.
- Place the corkscrew on the neck of the bottle and pull the sleeve down firmly to lock the corkscrew onto the bottle.
- Move the small handles down to twist the spiral into the cork. If the bottle turns when the spiral enters the cork, move the small handles back up, pull the sleeve further down and start again.
- Then move the large handles down to pull the cork out of the bottle and unlock the sleeve.
- The cork can be removed by moving all the handles up simultaneously.

Please note that it is important to regularly check the special coating on the spiral. The spiral should be replaced when this special coating has worn out.

Replacing the spiral
- Make sure all the handles are in a horizontal position.
- Remove the foilcutter from the corkscrew.
- Slide off the lid on top of the corkscrew.
- Move the large handles down, small handles up to lift the spiral frame.
- Carefully remove this frame.
- Dismantle the frame, keep the stainless steel ball in place and replace the spiral.
- Move the large handles down, small handles up to place the spiral frame in the corkscrew. Focus on the center of the control unit.
- Place the lid back on top of the corkscrew.