Fondis Wine Cellar Air Condition Unit - WINEC50SR

Product details
Trust Pilot Reviews

The Fondis WINEC50SR Wine Cellar Air Condition Unit has the same specification as the WINEC50S, but this unit can be fitted to an external wall thanks to the fitted Frost Belt. The WINEC50SR compressor has a heating belt so it won't frost if placed externally, we would recommend a cover over the top of the installation on the external wall to prevent direct contact with snow etc.

2 Year Warranty

Cooling for Cellars up to 50m3
Dual function electronic thermostat with display
Heating & Cooling
Best wine cellar conditions - Temperatures maintained between 8°C < 15°C
Heating function - Prevents temperature dropping too low
Booster Setting
Dust Filter
Installed through either an internal or external wall
Quiet when operating (Rubber shock absorbers for quiet operating)
Recommended that you check and clean filters every 4 months and change once a year

Unit Dimensions: H: 530mm x W: 552mm x D: 510mm

This unit MUST be installed through a wall, either an internal wall or an external wall, it will keep the wine cellar cool on the inside and warm on the outside (where the unit is ventilated too). If venting to an internal room within the house, the room mustn't be a boiler or plant room as the unit will over work and your desired humidity will not be reached. On average, a humidity of approximate 65% is perfect for a wine cellar. Cabinets have a pre-set temperature of 12°C.