This is a split refrigeration unit from Fondis, which has two units. The cold part of the unit is situated in the cellar/storage room, and the unit sits on the floor; the warm unit can be situated anywhere up to 8 metres away from the cellar. The external unit can be attached to a wall, and a hose connects the two units.
2-Year Warranty
- Cooling for Cellars up to 100m3
- Dual-function electronic thermostat with display
- Heating & Cooling
- Heating function - Prevents temperature dropping too low
- Booster Setting
- Dust Filter
- Install hose through Wall
- Installed through either an internal or external wall
- Frost belt fitted, making it suitable for installation on an external wall
- Recommended that you check and clean filters every four months and change them once a year
Unit Dimensions: HWD 380 x 540 x 525mm
This unit MUST be installed through either an internal wall or an external wall; it will keep the wine cellar cool on the inside and warm on the outside (where the unit is ventilated too). If venting to an interior room within the house, the room mustn't be a boiler or plant room, as the unit will overwork, and your desired humidity will not be reached. On average, a humidity of approximately 65% is perfect for a wine cellar. Cabinets have a pre-set temperature of 12°C.
Fitting can be arranged - charges apply.
Allow 2 - 3 weeks for delivery to the UK mainland
PDFs & Downloads
